The solid board production line is suitable for transferring 2-5 layers of 60-600g/m² roll grayboard paper through hydraulic mill roll stand, overhead bridge transportation, edge alignment, preheating, gluing, bonding, shaping, traction, and separation. Cutting, cross-cutting and delivery table and other processes are compounded into the required thick cardboard of various thicknesses and specific
Design speed:120m/min |
Work speed: 40-100m/min |
||
No. |
name |
|
note |
1 |
Hydraulic mill roll stand
|
Multi-point pneumatic brake, including double-track paper loading trolley and 5 meters long track. Paper clamping diameter 1500
|
|
2 |
Auto splicer |
Auto control the paper tension, change the paper roll without stop machine |
|
3 |
overbridge |
Heavy-duty bridge and stainless steel guardrail
|
|
4 |
5 ply edge alignment |
Taiwan Gold Medal Ultrasonic Automatic Edge Alignment System
|
|
5 |
Pre heater |
Steam heating, paper spreading roller Φ600mm, independent valve, manual control
|
|
6 |
Gluing machine |
Glue roller Φ270mm, independent transmission; frequency conversion control, electric glue application, electric glue adjustment. Motor power 2.2kw, speed ratio 1:23
|
|
7 |
Fusing press unit |
Contains 2 multi-head spiral spreading rollers; Pneumatic lifting, 4 sets of compaction rollers Φ175mm |
|
8 |
compactor |
Traction roller Φ525mm, pressure roller Φ420mm, fine grinding and hard chrome plating, independent transmission; frequency conversion control, motor power 11kw, speed ratio 23
|
|
9 |
Heating unit |
The length is 20 meters, 26 groups of fin-coiled radiators, the lower layer of insulation cotton is sealed for heat preservation, and the upper layer is sealed with a side-open movable shield. 20 sets of conveyor rollers, diameter 105mm, pneumatic adjustment. Independent drive, frequency conversion control, power 18.5kw, speed ratio 23
|
|
10 |
Bonding unit |
16 sets of compaction rollers, diameter Φ105mm, pneumatic lifting, 16 cooling fans |
|
11 |
Stractor & slitter |
The diameter of the lower iron roller of the tractor is Φ525, the upper rubber roller is Φ420mm, frequency conversion control, power 18.5kw, slitting with automatic correction.
|
|
12 |
NC cut off |
|
Servo computer servo control, automatic order change, paper cutting range 400-9999mm, cutter shaft diameter Φ188mm, power 22kw
|
13 |
Stacker |
|
Automatic counting, automatic alignment, automatic horizontal out, manual collection of paper.
|
14 |
Glue system |
|
1 glue tank, volume 1.5 tons, power 5.5kw, 1:23. 1 glue storage tank, volume 1 ton, power 3kw, 1:23. 4 sets of 1-inch diaphragm pumps, 1 set of 1.5-inch diaphragm pumps, without glue pipes and joints.
|
|